Specialist · INOZETEK Authorised Installer

Paint protection film specialist in Sydney

What separates a PPF specialist from a film fitter is the work you can't see in a quote: the prep, the trimming, the edges and the follow-up. Here is how we install INOZETEK paint protection film, and how to tell if a shop does it properly.

Quick answer

A paint protection film specialist installs a named, warranted film, corrects the paint before the film goes on, hand-trims from bulk film so edges can be wrapped, removes trims where needed, and checks the car again after the film settles. End Game Detailing is an INOZETEK Authorised Installer in the Shield Network. Every PPF package includes full paint correction and a Fireball coating, and the film is covered by INOZETEK's 10-year film warranty against film defects, subject to INOZETEK's terms. For prices and the front-end vs full decision, see our PPF buyer's guide.

Close-up of satin INOZETEK paint protection film on the bonnet and light bar of a Tesla Model Y L
Satin INOZETEK film on a Tesla Model Y L bonnet, hand-trimmed around the light bar.

What makes a PPF specialist

  • A named film with a manufacturer warranty. If a quote doesn't name the film and who stands behind it, ask.
  • Certification. Film brands authorise installers. We are an INOZETEK Authorised Installer and a Fireball Australia Certified Installer.
  • Correction before film. Film is clear. Swirls and marks under it stay there for the life of the film.
  • Bulk film, trimmed by hand. Pre-cut kits often stop short of the panel edge. Hand-trimming lets the film wrap around the edge wherever the panel allows.
  • Time. Full PPF takes 3–5 days with us. A full car done in a day leaves no time to remove trims, wrap edges or let a coating cure.
  • A follow-up visit. New film settles over the first few weeks. A specialist wants to see it again.
  • A shop that will still be here. A 10-year film warranty is only as useful as the installer who registers it and answers the phone. End Game has been in the industry for almost 10 years, and we register your INOZETEK warranty after the job.

INOZETEK paint protection film

We install INOZETEK film: optically clear, self-healing for light swirls, and covered by INOZETEK's 10-year film warranty against film defects, subject to INOZETEK's terms. Gloss film keeps your factory colour with a deeper, wetter look. Satin film is still clear but changes the whole car to a smooth satin finish, and is offered on full PPF. For a new colour as well as protection, INOZETEK colour-change film is available from $8,500: see colour-change PPF.

Satin INOZETEK paint protection film on the front guard and door of a Tesla Model Y L, edges wrapped around the panel
Satin film across the guard and door of a Tesla Model Y L.

How we install PPF

  1. Free studio inspection. We look at the paint under studio lights and show you film samples.
  2. Wash and decontamination. Hand wash, iron and tar removal and clay, so the film goes onto clean paint.
  3. Full paint correction. Swirls and wash marring are polished out so nothing is sealed under the film. Read why on our paint correction and protection specialist page.
  4. Trim removal. Badges, trims and mirror parts come off where needed, so the film can tuck behind them.
  5. Hand-trimmed bulk film. Each panel is laid and trimmed by hand, with edges wrapped wherever the panel allows.
  6. Fireball coating. Fireball goes on top of the film, or on the paint the film doesn't cover, and cures at least overnight in the studio.
  7. Handover. We walk you through aftercare and register your INOZETEK warranty.
  8. Follow-up. One complimentary wash and inspection 2–4 weeks after handover. A little lifting or bubbling can be normal on new film and is normally fixed at this visit.

After that first visit, maintenance washes for PPF customers are $100.

Why every PPF job includes a Fireball coating

Film stops chips. A coating makes the film, and the paint around it, easier to keep clean and adds gloss and water beading. On front-end PPF, the rest of the car gets a Fireball coating, so the panels without film are still protected from bird droppings, grime and wash marks. On full PPF, Fireball goes on top of the film. We are a Fireball Australia Certified Installer, and Fireball Graphene Eternity is also available on its own as a 10-year graphene coating: see graphene coating Sydney.

Coverage options

PackageCoveragePrice (inc GST)
Front-end PPFBonnet, front bumper, front guards, side mirrors and headlights in film; Fireball coating on the rest. Gloss only.$2,500 Tesla / $3,500 other cars
Full PPF, Tesla Model 3 / Y / Y LEvery painted panel, gloss or satin at the same price, Fireball on top$5,500
Full PPF, other carsEvery painted panel, Fireball on topFrom $6,500 small and medium sedans and hatches; $7,000–7,500 mid-size SUVs, large sedans and utes
Colour-change PPFINOZETEK colour-change film, Fireball on topFrom $8,500

Matte or satin full PPF on non-Tesla cars adds $500–1,000. Large SUVs, exotics and the Tesla Model S, Model X and Cybertruck are quoted after a free inspection. Every package includes paint correction, a complimentary glass coating and wheel face coating, and the 2–4 week wash and inspection.

Owners of a Tesla should start with our Tesla PPF Sydney page and the Tesla PPF cost guide. For everything else, see paint protection film Sydney and full car PPF.

Do you need film, or is a coating enough?

Not every car needs PPF. If your car mostly does suburban driving, lives in a garage, and your priority is gloss and easy washing rather than stone chips, a coating on its own may be the better buy. Feynlab Ultra V3, a 7-year ceramic coating, starts from $1,650, and Fireball Graphene Eternity, a 10-year graphene coating, starts from $1,950, both with paint correction. If you do a lot of motorway driving on the M4, M5 or M7, front-end PPF with a Fireball coating on the rest is the usual middle ground. We'll give you an honest answer at the inspection. Compare them in our PPF vs ceramic coating guide or the ceramic coating cost guide.

White Nissan Skyline R32 GT-R with a glossy ceramic-coated finish in the End Game studio
White R32 GT-R finished in our studio.

Where we are

Our studio is at U35/575 Woodville Rd, Guildford, a short drive for owners in Parramatta, Bankstown and Yagoona, Smithfield, Wetherill Park, Liverpool, Strathfield, Burwood and the rest of Western Sydney. We are studio only, with no mobile service, because correction and coatings need controlled lighting and a clean, covered space to cure. Weekend drop-offs welcome (Sat/Sun, ideally 10–11am); all work Mon–Fri 9am–5pm. Coming to Smithfield, early 2027.

Get a PPF quote

Tell us your car, the coverage and the finish you want, and we'll reply with the price and the next free dates. Call 0400 053 885 or use the quote form. Comparing studios? Use our checklist for choosing a detailer.

Prices are AUD inc GST and current at November 2026. Prices are subject to change; for an accurate quote we recommend a free studio inspection.

PPF specialist Sydney: frequently asked questions

What does a PPF specialist do differently?

A specialist installs a named, warranted film, corrects the paint first, hand-trims bulk film so edges can be wrapped, removes trims where needed, gives the job enough time, and checks the film again after it settles.

Which paint protection film do you use?

INOZETEK. We are an INOZETEK Authorised Installer in the Shield Network, and the film is covered by INOZETEK's 10-year film warranty against film defects, subject to INOZETEK's terms. We register the warranty for you.

Is paint correction included with PPF?

Yes. Every PPF package includes wash, decontamination and full paint correction before the film goes on, plus a Fireball coating.

How long does a full PPF install take?

Plan for 3 to 5 days for full PPF. That includes prep, correction, trim removal, the install and an overnight cure for the Fireball coating.

How much is PPF in Sydney?

At End Game, front-end PPF is $2,500 for Teslas and $3,500 for other cars. Full PPF is $5,500 for a Tesla Model 3, Model Y or Model Y L and from $6,500 for small and medium sedans and hatches. Colour-change PPF starts from $8,500.

Do I need PPF or is a ceramic coating enough?

If stone chips are your main worry, choose film. If your priority is gloss and easy washing on a car that does mostly suburban driving, a Feynlab Ultra V3 or Fireball Graphene Eternity coating may be enough. We advise at the free inspection.

When can I wash my car after PPF?

Give the film 2–4 weeks to settle and avoid washing and pressure washers until then. Your first wash and inspection, 2–4 weeks after handover, is complimentary.

Visit the studio

Guildford studio, studio only.

U35/575 Woodville Rd, Guildford NSW 2161 · 0400 053 885 · info@endgamedetailing.com.au

Open Monday to Friday, 9am–5pm. 5.0 from over 80 Google reviews. Coming to Smithfield, early 2027.